China Custom Forged 34CrNiMo6 Rough Shaft Spline Shaft Rotor Shaft near me manufacturer

Product Description

Your customized parts,Customized solutions
Company profiles
We established in 2571 year, named Xihu (West Lake) Dis. Tongyong Machinery Company. In 2019 renamed HangZhou Hejess Machinery Co.,Ltd and established new plants. 
We are mainly engaged in the designing and manufacturing of steel machinery components and non-standard machinery parts, including shafts, flange, gears, rings, sheaves, couplings, bearing supports,  and forgings etc.

Production Parameter
 

  • Material: Alloy steel,Carbon steel,Carburizing steel,Quenched and tempered steel
  • Heat treatment: Normalizing,Annealing,Quenching&Tempering,Surface Quenching, Induction hardening
  • Machining: CNC Turning,CNC Milling,CNC Boring,CNC Grinding,CNC Drilling
  • Gear Machining: Gear Hobbing,Gear Milling,CNC Gear Milling,Gear Cutting,Spiral gear cutting,
  • Gear Cutting
  • Inspection: Chemical Composition Test,Ultrasonic Test,Penetration Test,Radiographic Test,

Magnetic Test,Tensile Strength Test,Impact Test,Hardness Test,Dimension Test.

We can provide forging from 1kg to 5Ton. And make precison machining. Also have welding and assembly capabilities.

Quality Control
Product quality is what we are paying great attention to all the time. Each product is produced under careful control at every process and inspected by experienced engineers strictly according to the related standards and customer requirements, ensuring the super performance of our goods when arrive at customer.
Ø Production Flow Chart
1, Order Analyzing
    Know requirements of raw material, chemical composition, Mechanical properties.
    Analyzing how to forging and how to make heat treatment.
2, Raw material.
    Use which raw material, plate, round bar, steel ingot.
   According your parts, choose the best cost performance one.
   If you required special material, will customized from steel factory.
   Customized raw material according your requirments.
3, Forging
    Make forging process chart and forging form
    Make forging drawing
    Make 3D drawing
    Make forging mould
4, Pre –  forging
5, Finish – forging
Natural gas heating furnaces are monitored and controlled by computer programs to ensure precise heating within set time and temperature range as required.
A broad range of forging equipment,including friction press, hudraulic hammer, forging hammers.With the aids od intelligent software,proper deformation,forging ration,ingot size and weight,forging tooling and equipment will be determined to ensure the wrought structure through hout and sound quality.
6, Pre- machining
7, Make UT (ultrasonic) inspection.
8, Make heat treatment
9, Inspect hardness and mechanical properties.
10, Make precision machining / finished machining.
      Use CNC machining center, CNC milling, CNC boring, CNC grinding
11, Inspect dimenssions.
12, Protecting and packing.

Main market :  America, Australia, Malaysia,Israel,Britain, Russia,Canada, ect.

Services : The services we can provide are : FOB, CIF, DAP. Only give me the drawings and requirements, you will receive the goods at your home.
 Wehas accumulated rich knowledge and experience in the producing and exporting. Familar every process, when metting problems, be able to find a solution timely.

Excellent service attitude, fast reaction speed, on-time delivery, consciousness of responsibility and flexibility is what we are practicing from the very beginning, combining with high credit, competitive price, close interaction with customer and innovative way of working, make us win more and more business and excellent customer satisfaction.
To choose us, HangZhou CZPT Machinery, as your business partner, never will you find you are wrong!

PRODUCTION DETAILS

Technology : Free forging / Open forging / Die forging / closed forging / Impression die forging / Flashless forging / multi-ram forging / multidirectional die forging / precision forging / croe forging / combination forging / extrusion forging / roll forging / reducer rolling / ring rolling /  open die forging / flat die forging / loose tooling forging
Material Standard : ISO / DIN / W-Nr / BS / EN / ASTM / ASME / AISI / UNS / SAE / JIS / SS/ NF / GOST / OCT / GB
Material Type: Austenilic Ni-Cr Stainless Steel / Austenitic Alloy Steel / Austenitic Stainless Stee / Axle Shaft Steel /  Bar Steel / Bearing Steel / Bolting Steel / Carbon And Low-Alloy Steel Vessels / Carbon Steel / Carbon Tool Steel /  Carbon-Containing Alloy Steel / Case-Hardened Steel / Cast Steel / Cast-Steel Pipe / Centrifugal Steel / Centrifuge(D) Steel / Channel Steel  / Chilled Hardened Steel / Chrome Hardened Steel / Chrome-Carbon Steel  / Chrome-Molybdenum Steel  / Chrome-Nickel Steel / Closed Die Steel / Coating Steel Pipe / Die Steel / Drawing Steel / Extra-High-Tensile Steel / Fabricated Steel /  Ferritic Stainless Steel  / Ferritic Steel / Figured Steel / Fine Steel / Flange Steel / Groove Steel / Hard Alloy Steel /  High Alloy Steel / High Boron Steel / High Carbon Steel / High Chrome Alloy Steel / High Manganese Steel / High Nickel-Chrome Steel

 

Show the production process as below photos:

Our Products Catalogue
 

Products Catalogue
Item Application Technical Material Picture Market
1 Lift Rod Forging – heat treatment –  CNC machining – CNC Grinding Alloy steel Australia
2 Eccentric shaft Forging – heat treatment –  CNC machining – CNC Grinding Alloy steel Britain
3 Pin shaft Forging – heat treatment –  CNC machining Alloy steel USA
4 Spindle Forging – heat treatment –  CNC machining – CNC Grinding Alloy steel Germany
5 Step shaft Forging – heat treatment –  CNC machining Alloy steel Peru
6 Long shaft Forging – heat treatment –  CNC machining – CNC Grinding Alloy steel Ukraine
7 Big head shaft Forging – heat treatment –  CNC machining Alloy steel Israel
8 Hollow shaft Forging – heat treatment –  CNC machining Custom Alloy steel Singapore
9 Zinc plating flange Forging – heat treatment –  CNC machining – Zinc plating Alloy steel Australia
10 Spline shaft Forging – heat treatment –  CNC machining Alloy steel Singapore
11 Gear Shaft Forging – heat treatment –  CNC machining – Surface Quenching Alloy steel Russia
12 Gear Forging – heat treatment –  CNC machining Alloy steel Russia
13 Ring Forging – heat treatment –  CNC machining Alloy steel USA
14 Ring Forging – heat treatment –  CNC machining Alloy steel Malaysia
15 Half ring Forging – heat treatment –  CNC machining Alloy steel Malaysia
16 Cylinder Forging – heat treatment –  CNC machining Alloy steel Iran
17 Flange Forging – heat treatment –  CNC machining Alloy steel USA
18 Groove ring Forging – heat treatment –  CNC machining Alloy steel USA
19 Flange shaft Forging – heat treatment –  CNC machining Alloy steel USA
20 Flange Forging – heat treatment –  CNC machining Alloy steel USA
21 Pin shaft Forging – heat treatment –  CNC machining Alloy steel USA
22 Shaft Forging – heat treatment –  CNC machining Alloy steel USA
23 Square flange Forging – heat treatment –  CNC machining Alloy steel USA    Britain 
24 Nut Forging – heat treatment –  CNC machining Alloy steel USA
25 Flange Forging – heat treatment –  CNC machining Alloy steel USA
26 Flange Forging – heat treatment –  CNC machining Alloy steel USA
27 Forks Wire cutting – heat treatment – CNC machining Alloy steel USA
28 Closed die forging part Forging – CNC machining Alloy steel USA
29 Closed die forging part Forging – CNC machining Alloy steel USA
30 Closed die forging part Forging – CNC machining Alloy steel USA

The Benefits of Spline Couplings for Disc Brake Mounting Interfaces

Spline couplings are commonly used for securing disc brake mounting interfaces. Spline couplings are often used in high-performance vehicles, aeronautics, and many other applications. However, the mechanical benefits of splines are not immediately obvious. Listed below are the benefits of spline couplings. We’ll discuss what these advantages mean for you. Read on to discover how these couplings work.

Disc brake mounting interfaces are splined

There are 2 common disc brake mounting interfaces – splined and six-bolt. Splined rotors fit on splined hubs; six-bolt rotors will need an adapter to fit on six-bolt hubs. The six-bolt method is easier to maintain and may be preferred by many cyclists. If you’re thinking of installing a disc brake system, it is important to know how to choose the right splined and center lock interfaces.
splineshaft

Aerospace applications

The splines used for spline coupling in aircraft are highly complex. While some previous researches have addressed the design of splines, few publications have tackled the problem of misaligned spline coupling. Nevertheless, the accurate results we obtained were obtained using dedicated simulation tools, which are not commercially available. Nevertheless, such tools can provide a useful reference for our approach. It would be beneficial if designers could use simple tools for evaluating contact pressure peaks. Our analytical approach makes it possible to find answers to such questions.
The design of a spline coupling for aerospace applications must be accurate to minimize weight and prevent failure mechanisms. In addition to weight reduction, it is necessary to minimize fretting fatigue. The pressure distribution on the spline coupling teeth is a significant factor in determining its fretting fatigue. Therefore, we use analytical and experimental methods to examine the contact pressure distribution in the axial direction of spline couplings.
The teeth of a spline coupling can be categorized by the type of engagement they provide. This study investigates the position of resultant contact forces in the teeth of a spline coupling when applied to pitch diameter. Using FEM models, numerical results are generated for nominal and parallel offset misalignments. The axial tooth profile determines the behavior of the coupling component and its ability to resist wear. Angular misalignment is also a concern, causing misalignment.
In order to assess wear damage of a spline coupling, we must take into consideration the impact of fretting on the components. This wear is caused by relative motion between the teeth that engage them. The misalignment may be caused by vibrations, cyclical tooth deflection, or angular misalignment. The result of this analysis may help designers improve their spline coupling designs and develop improved performance.
CZPT polyimide, an abrasion-resistant polymer, is a popular choice for high-temperature spline couplings. This material reduces friction and wear, provides a low friction surface, and has a low wear rate. Furthermore, it offers up to 50 times the life of metal on metal spline connections. For these reasons, it is important to choose the right material for your spline coupling.
splineshaft

High-performance vehicles

A spline coupler is a device used to connect splined shafts. A typical spline coupler resembles a short pipe with splines on either end. There are 2 basic types of spline coupling: single and dual spline. One type attaches to a drive shaft, while the other attaches to the gearbox. While spline couplings are typically used in racing, they’re also used for performance problems.
The key challenge in spline couplings is to determine the optimal dimension of spline joints. This is difficult because no commercial codes allow the simulation of misaligned joints, which can destroy components. This article presents analytical approaches to estimating contact pressures in spline connections. The results are comparable with numerical approaches but require special codes to accurately model the coupling operation. This research highlights several important issues and aims to make the application of spline couplings in high-performance vehicles easier.
The stiffness of spline assemblies can be calculated using tooth-like structures. Such splines can be incorporated into the spline joint to produce global stiffness for torsional vibration analysis. Bearing reactions are calculated for a certain level of misalignment. This information can be used to design bearing dimensions and correct misalignment. There are 3 types of spline couplings.
Major diameter fit splines are made with tightly controlled outside diameters. This close fit provides concentricity transfer from the male to the female spline. The teeth of the male spline usually have chamfered tips and clearance with fillet radii. These splines are often manufactured from billet steel or aluminum. These materials are renowned for their strength and uniform grain created by the forging process. ANSI and DIN design manuals define classes of fit.
splineshaft

Disc brake mounting interfaces

A spline coupling for disc brake mounting interfaces is a type of hub-to-brake-disc mount. It is a highly durable coupling mechanism that reduces heat transfer from the disc to the axle hub. The mounting arrangement also isolates the axle hub from direct contact with the disc. It is also designed to minimize the amount of vehicle downtime and maintenance required to maintain proper alignment.
Disc brakes typically have substantial metal-to-metal contact with axle hub splines. The discs are held in place on the hub by intermediate inserts. This metal-to-metal contact also aids in the transfer of brake heat from the brake disc to the axle hub. Spline coupling for disc brake mounting interfaces comprises a mounting ring that is either a threaded or non-threaded spline.
During drag brake experiments, perforated friction blocks filled with various additive materials are introduced. The materials included include Cu-based powder metallurgy material, a composite material, and a Mn-Cu damping alloy. The filling material affects the braking interface’s wear behavior and friction-induced vibration characteristics. Different filling materials produce different types of wear debris and have different wear evolutions. They also differ in their surface morphology.
Disc brake couplings are usually made of 2 different types. The plain and HD versions are interchangeable. The plain version is the simplest to install, while the HD version has multiple components. The two-piece couplings are often installed at the same time, but with different mounting interfaces. You should make sure to purchase the appropriate coupling for your vehicle. These interfaces are a vital component of your vehicle and must be installed correctly for proper operation.
Disc brakes use disc-to-hub elements that help locate the forces and displace them to the rim. These elements are typically made of stainless steel, which increases the cost of manufacturing the disc brake mounting interface. Despite their benefits, however, the high braking force loads they endure are hard on the materials. Moreover, excessive heat transferred to the intermediate elements can adversely affect the fatigue life and long-term strength of the brake system.

China Custom Forged 34CrNiMo6 Rough Shaft Spline Shaft Rotor Shaft     near me manufacturer China Custom Forged 34CrNiMo6 Rough Shaft Spline Shaft Rotor Shaft     near me manufacturer

Recent Posts